MS-TL - Temperature and Light Level Sensor - Black Case iButton Reader The MS-TPD can be used

The MS-TPD can be used as either an airflow sensor or a pressure sensor

This supply is for the People's Republic of China

It can read up to 2048 values at a logging rate of 1 minute to 115 minutes

and a full spec sheet of the DS18B20 can be found in Appendix One of the T-Sense manual

rate: '3 min to 273 hrs'

MS-TL - Temperature and Light Level Sensor - Black Case iButton Reader The MS-TPD can be usedThis sensor measures temperature using a DS 2438Z with an operating range of 40C to +85C. It is not calibrated, but empirical data proves it to be accurate within a few degrees of actual temperature. The sensing device is partially enclosed and mounted to the PCB, so the time to respond to temperature change will be relatively slow. The sensor should not be placed in direct sunlight, as the radiant heat will become trapped inside the enclosure and