Matek Hall Current Sensor 150A Tandem X18 What really sets the Meteor75

What really sets the Meteor75 Pro apart is its state-of-the-art flight controller

Note that this is not a patch

Firmware Target: TMOTORF7 (Betaflight)

70~75mA(binding)

5V/16V BEC for VTX (switchable and real Pit*)

Matek Hall Current Sensor 150A Tandem X18 What really sets the Meteor75Sspecifications Hall effect current sensor No voltage drop and heat on current sensor components Offset and Sensitivity are calibrated in factory Continuous current rating: 0~150A DC Sensitivity: 20mV A, INAV BF scale = 200, ArduPilot BATT_AMP_PERVLT = 50 VBAT voltage sense: 0~69V, INAV scale = 2100, BF scale = 210, ArduPilot BATT_VOLT_MULT = 21. 0 Power Consumption: 17mA Voltage offset error at zero current : + 10mV Curr output voltage error: 5%