30 mm Hi-Load Plain Bearing Block for 2:1 Halyard. Mainsail and Code 0 Grease Hole Cover This is the locking adhesive

This is the locking adhesive used for Stalok terminals and any other screw attachment that needs to be secured

Length: 46 mm

The cam cleat arm can be set to a variety of angles and the block features a swiveling shaft with swivel lock - a plastic washer which is placed between block body and shackle for fixed 0° or 90° shackle position

Glass fiber reinforced cheeks provide strength and durability

L-MAX: 493 mm

30 mm Hi-Load Plain Bearing Block for 2:1 Halyard. Mainsail and Code 0 Grease Hole Cover This is the locking adhesive2: 1 halyard block for Seldn CX15 and CXr15 Code Zero furler. Machined and hard anodized aluminium block with captive pin. Acetal sheave. To boost the performance when using a Code Zero, the halyard load must be higher than what normal halyard boxes and stoppers can handle. Therefore, a 2: 1 purchase needs to be arranged by fixing the dead end of the halyard in the mast and letting it run through a block attached to the halyard swivel. Position on the