19 thread Standard Wire with eye terminal, ø8 mm, Length 17,9 m, Furlex 300S/E/TD Top guard The depth and the shape

The depth and the shape of the slug is designed to correspond to sail slide HA 91 from Holt Allen and A 009 from Bainbridge

Weight: 23 g

The control sheaves are RBB60 cheek blocks with Torlon ball bearings separated from each other in ball cages

Clevis pin ø: 8

Min line size: 1 mm

19 thread Standard Wire with eye terminal, ø8 mm, Length 17,9 m, Furlex 300S/E/TD Top guard The depth and the shapeThe original wire for Furlex 300S E and TD. 1x19 strands, AISI 316 stainless steel. The purpose of the plastic tube at the top end is to center the wire in the luff extrusion and prevent chafe between wire and top extrusion. This bearing is permanently fixed with a talurit. The newer Furlex models, of the 4th generation, has a purpose made top guard and do not need the roller. Our recommendation is that the forestay wire is replaced after 20000