Solid biofuels. Determination of moisture content. Oven dry method - Total moisture. Simplified method Ingestion-build-239834 wax or oil

wax or oil

NOTE 1 Thief-resistant lock assemblies that only allow egress using a key or assemblies that provide a secure (no egress) mode in addition to keyless egress are specified in BS 3621 and BS 10621 (respectively)

The alignment between policies

Hazards related to paper refining plants include Refiner or power transmission elements

BS EN ISO 11137-1:2015 Sterilization of health care products

Solid biofuels. Determination of moisture content. Oven dry method - Total moisture. Simplified method Ingestion-build-239834 wax or oil1 Scope This document describes the method of determining the total moisture content of a test sample of solid biofuels by drying in an oven and is used when the highest precision is not needed, e. g. for routine production control on site. The method described in ISO 18134 (all parts) is applicable to all solid biofuels. The moisture content of solid biofuels (as received) is always reported based on the total mass of the test sample (wet basis).