Railway applications. Infrastructure. Non-destructive testing on rails in track - Eddy current testing of rails in track Ingestion-build-141043 Principal elements

Principal elements

BS 3424-26 on a determination of the resistance of coated fabrics to water penetration and surface wetting is useful for:

Note: This method is not suitable for the determination of the density or relative density of highly volatile liquids having Reid vapour pressures greater than 50 kPa according to ISO 3007 or having an initial boiling point below 40 °C

BS EN 12501-1 deals with the protective systems of specific buried metallic structures which are to be used in the combination with the corrosion load in soil

All ISO standards are reviewed every five years and then revised if needed

Railway applications. Infrastructure. Non-destructive testing on rails in track - Eddy current testing of rails in track Ingestion-build-141043 Principal elements1 Scope This document is applicable to testing of rails installed in track for detecting rail surface cracks. This document applies to testing equipment in inspection trains or reprofiling machines and manual systems. This document specifies the requirement for testing principles and systems in order to produce comparable results in respect to the location and the characteristic of surface cracks. This document is not aiming to give any guidelines for