180 Degree Round Tube Die for 105 Brute Tube and Pipe Bender (26.0 mm OD, 88.9 mm CLR) NPS 1/4 Minimum Inside Radius: Approximately 18-70”

Minimum Inside Radius: Approximately 18-70” (457-1778 mm)

This roll set will bend the following sizes of material: 1-3/4" x 1-3/4" Square

Outside Diameter of the Tubing (OD): 1-3/4" (44

All of our dimple dies are CNC-machined from the highest grade domestic materials available

The simulation also forced an additional setup sheet which shows cartoon strip style transitions of the tube being bent

180 Degree Round Tube Die for 105 Brute Tube and Pipe Bender (26.0 mm OD, 88.9 mm CLR) NPS 1/4 Minimum Inside Radius: Approximately 18-70”Specs Outside Diameter of the Tubing (OD): 26. 0 mm Minimum Wall Thickness (DOM): 0. 083 (2. 1 mm) Minimum Wall Thickness (4130): 0. 083 (2. 1 mm) Minimum Wall Thickness (ERW): 0. 095 (2. 4 mm) Minimum Wall Thickness (Stainless): Contact for Details Minimum Wall Thickness (Aluminum): Contact for Details Minimum Wall Thickness (Other): Contact for Details Maximum Wall Thickness: 0. 134 (3. 4 mm) Centerline Radius: 3 1 2 (88. 9 mm) Maximum Degree of