Al-Clad CR2032 Coin Cell Case (20d x 3.2mm) for Li-ion Battery for > 4.5V - 60 Sets/pck-CR2032-CASE-AL2S Battery Analyzer/Cycler you need a pressure controller

you need a pressure controller by click Pic below

Each channel of the analyzer has an independent constant-current and constant-voltage source

Polymer Size: 14

Specifications: Orientation:  M <10-10> or <100>  +/-0

1o to M-plane leftwards from the Primary

Al-Clad CR2032 Coin Cell Case (20d x 3.2mm) for Li-ion Battery for > 4.5V - 60 Sets/pck-CR2032-CASE-AL2S Battery Analyzer/Cycler you need a pressure controllerThis is a special CR2032 coin cell case with Aluminum coated on the inside and outside of the positive can (60pcs pack). It can tolerate polarization of higher voltages (up to 5. 5V) due to the passivation of cladding by electrolyte component (especially LiPF6 based electrolyte system) to form a layer of AlF3. This AlF3 layer is thin enough (several angstroms) to allow electron tunneling, and simultaneously blocking the dissolution of Al3+ into the