90 Degree Round Tube Die for 105 Standard Duty and Heavy Duty Tube and Pipe Bender (35.0 mm OD, 177.8 mm CLR) 2" OD Accurate to within a fraction

Accurate to within a fraction of a degree

In the graphic below you can watch the part being created as the values are entered in

This roll set will bend the following sizes of material: 1-1/4" x 1-1/4" Square

Minimum Outside Diameter (OD): 1/2" (12

Outside Diameter of the Tubing (OD): 22

90 Degree Round Tube Die for 105 Standard Duty and Heavy Duty Tube and Pipe Bender (35.0 mm OD, 177.8 mm CLR) 2" OD Accurate to within a fractionSpecs Outside Diameter of the Tubing (OD): 35. 0 mm Minimum Wall Thickness (DOM): 0. 058 (1. 5 mm) Minimum Wall Thickness (4130): 0. 058 (1. 5 mm) Minimum Wall Thickness (ERW): 0. 065 (1. 7 mm) Minimum Wall Thickness (Stainless): Contact for Details Minimum Wall Thickness (Aluminum): Contact for Details Minimum Wall Thickness (Other): Contact for Details Maximum Wall Thickness: 0. 134 (3. 4 mm) Centerline Radius: 7" (177. 8 mm) Maximum Degree of Bend: