Data Rig Compression Points As the shafts are extracted

As the shafts are extracted the tape or line is pulled into the hole which can then be attached to the microduct and installed

The push cap is attached directly to the PVC pipe that is ready to be installed after all of the Bullet Mole shafts are removed

All shafts points and caps are interchangeable

It can also install larger sized pipes by purchasing larger points

It is threaded into the end of a 2” sch 40 PVC pipe or conduit

Data Rig Compression Points As the shafts are extractedThis rig is used to punch holes and install micro duct from the edge of the sidewalk to the road with very minimal disturbance to the lawn next to the sidewalk. It requires a very shallow and short entrance trench approx 6 Inches deep and 24 to 30 inches long depending on the angle. The rig itself attaches to the sidewalk and does not require that stakes or anchoring devices be driven into the property owners soil next to the sidewalk The trajectory