5 Ft. Quick Shaft - 65" Long. Compression Points This part is used to

This part is used to insert a 3/4' & 1" Sch 40 PVC pipe into the ground after the initial hole is opened with the compression point

This rig is used to punch holes and install micro duct from the edge of the sidewalk to the road with very minimal disturbance to the lawn next to the sidewalk

This stand is made of steel and has a durable powder coating finish

It is actually 1-3/4" in diameter and will make a hole large enough to accommodate a 1" Sch 40 pipe with a coupling

The push point is connected to the front or leading end of the pipe and the push cap is inserted into the opposite end of the same pipe

5 Ft. Quick Shaft - 65" Long. Compression Points This part is used toThe quick shafts are used to connect to any number of other quick shafts in sequence after the Master shaft, which is the first shaft to go into the ground with the compression point. NOTE: The master shaft may be omitted and only Quick Shafts used together, however; the master shaft should be used whenever possible with a compression point.